Portwest A120 Basic PU Palm Coated Glove

• CE certified
• Perfect for intricate tasks
• Superb abrasion and tear resistance
• Palm dipped to increase dexterity and ventilation
• Smooth PU coating for increased abrasion resistance
• 100% Breathable seamless liner
• 13 gauge liner for a perfect fit
• Retail bag which aids presentation for retail sales

EN 388:2016 - (2.0.3.1.X.)
EN 420

Sizes Small to XL in stock - X-Small and XXL to order

EN388: 2016 Explained

Gloves when tested to the new standard will show on them (and their outer packaging) the EN388: 2016 rating.

Lookout for the EN388 2016 shield shaped symbol - underneath you will find four numbers followed by 1 to 2 letters - for example you should see markings like 3453E (Please note a few gloves may also show a P at the end of the digits).

What those numbers and letters mean...

1st [number]: Abrasion Resistance - based on the number of cycles required to abrade through the tested sample - 0 (lowest) 4 (highest).

2nd [number]: Coupe method circular blade cut resistance (the old test method) - based on the number of cycles to cut through the tested sample - 0 (lowest) 5 (highest)

3rd [number]: Tear resistance - based on the amount of force required to tear the tested sample - 0 (lowest) 4 (highest)

4th [number]: Puncture Resistance - based upon the amount of force required to pierce the tested sample with a standard sized point - 0 (lowest) 4 (highest)

5th [letter]: Straight blade cut test (the new test method) - using the new TDM ISO13997 testing method - based on the average load required to achieve a cut using a straight blade - A (lowest) F (highest) -

6th [letter]: Impact test - This is an optional test and will only be shown on certain types of gloves - Gloves will be marked with a P as the last letter of the markings.

Please note that not all gloves in circulation will show the markings for the new standard - manufacturers and distributors stocks will take some time to clear through.

The new cut test method gives you a much better idea of how the glove will perform in the real world. It's worth noting that many gloves that were tested cut level 5 to the old standard (so the highest possible score) were when tested to the new standard given scores of C to D (so a good cut rating but not the best) thus highlighting the need for the new cut test method.

A range of cut level E and F gloves are available.

Note: Some manufacturers where the gloves primary job is not cut resistance have opted to not have their gloves tested to the new cut standard - if this is the case then an "X" will be shown.